| Hp Technik GmbH工業泵 |  | | 德國(guo)Hp Technik GmbH工(gong)業泵A 產品系列：
|  |
| Series PON
 Technical Selection Chart: Scaled Drawings Direction of rotation I = indirect – counterclockwise D = direct – clockwise Nozzle Port R = on the right-hand side L = on the left-hand side The direction of rotation can only be changed in the factory. Therefore please assure that you state the desired direction of rotation and the direction of the nozzle port as per the size chart sheet when ordering! Standard design of the pump for two pipe installation, design for one pipe installation can be changed individually （see Operation Installation and Maintenance Instructions）. All hp-oilburner pumps series PON can be equiped with electric heating, serie H3, at the factory. | | Size | Capacity l/h
at n = 2800 min-1
viscosity 5 cSt. | direction of rotation | nozzle port | order number | max. allowed
pump
RPM（min-1 | gear rotor size Ø | initial pump
breakaway
touque（Nm） | net
weight
（kg） | | at 9 bar | at 30 bar | at 40 bar | I-L | I-R | D-L | D-R | | PON 3 | 90 | 60 | 50 | D = direct-clockwise | R | 0130601 | 0130611 | 0140601 | 0140611 | 3.600 | 25 | 1,2 | 5,0 | | PON 4 | 160 | 130 | 120 |
|
| 0130602 | 0130612 | 0140602 | 0140612 | 3.600 | 25 | 1,2 | 5,0 | | PON 6 | 240 | 200 | 190 | I = indiret-counterclockwise | L | 0130603 | 0130613 | 0140603 | 0140613 | 3.600 | 25 | 1,2 | 5,0 | | PON 7 | 320 | 270 | 260 |
|
| 0130604 | 0130614 | 0140604 | 0140614 | 3.600 | 25 | 1,2 | 5,0 |
| Size | Capacity l/h
at 9 bar（l/h） | connection | pressure range（bar） | RPM（min-1 | medium | accessories | | nozzle | suction side | bypass | manometer | | PON 3 | 90 | 1/4" | 1/2" | 1/2" | 1/8" | 1 = 1-4 | 1 = 1.400 | O = fuel oil EL + L | H3 - heating element PON | | PON 4 | 160 | 1/4" | 1/2" | 1/2" | 1/8" | 2 = 2-9 |
| MGO/MDO | E-one pipe installation | | PON 6 | 240 | 1/4" | 1/2" | 1/2" | 1/8" | 3 = 6-25 | 2 = 2.800 | 5 = fuel oil M + S | Z - two pipe installation | | PON 7 | 320 | 1/4" | 1/2" | 1/2" | 1/8" | 4 = 14-40 |
|
|
|
| Conversation Table
Suntec - hp-TECHNIK | | Suntec | | hp-TECHNIK | | Suntec | | hp-TECHNIK |
|
| PON 3-D |
|
|
| PON 3-I | | E4/J4 | ==> | PON 4-D |
| E4/J4 | ==> | PON 4-I | | E6/J6 | ==> | PON 6-D |
| E6/J6 | ==> | PON 6-I | | E7/J7 | ==> | PON 7-D |
| E7/J7 | ==> | PON 7-I | |
| hp Industrial Pump Program An internal gear rotor drives an eccentric, externally toothed gear.
The rotor and the toothed wheel are sealed with a fixed crescent.
Internal gear pumps have been in use for more than 40 years and are used in many areas of industry because of their favorable construction and design. | Series B 
Series VB
Series VBR
Series NV
Series UHE | |
| Key for hp-Special Pumps |
A total of 5 series of hp industrial pumps and hp special pumps are available.
| 
Series B
| 
Series VBR with Overflow
| 
Series UHE with Overflow
| |  | 
Series VB with Overflow Valve
| 
Series NV with Overflow | | | Applications: |
|
| Oil Burning Systems
As oil burner pumps, closed circular pipe and transfer pumps for all fuel oils EL, L, M, S, ES, coaltar oils, lignite tar, oils, biofuels, kerosene.
|
|
| Machine Construction
As hydraulic pumps in hydraulic control units, as lubricating pumps for lubricating oils and greases, as cooling water pumps for water-oil emulsions. |
|
| Mineral Oil Industry
As feed pumps for oils, grease, tar and bitumen.
|
|
| Ship Building
As lubricating oil pumps and booster pumps for lubricating, diesel and heavy oils. |
|
|
Discharge Range: 45 to 6000 l/h
Operating Pressures: 0 - 40 bar
Temperatures: up to 150°C
Compatible with Santex TA |
| In addition to the applications and pumping mediums mentioned here, hp industrial pumps are used in many other industries – pumping a wide variety of different mediums. |
|
Material: | |
Advantages: | Pump casings are made of hydraulic cast iron （GG 25）; rotor is of CK 70; pinion is of 16 Mn Cr 5; axial face seal of cast iron/coal; up to 150°C Viton.
|
| Self-priming, self-lubricating, practically non-pulsating, quiet-running, practically maintenance-free, pressure proof and vacuum-tight Shaft seals. | | | | 
| for determination of the order numbers:
| | Series | Discharge l/h | Direction
of
rotation
viewed
from
Shaft | Pressure
settings
bar | Speed of Rotation | Medium | Special Production,
Accessories
（add code letters consecutively）
| 1400 min-1
0 bar | 2800
min-1
0 bar | | B | VB | VBR | NVBR | P | 45 | P | 90 | D = clockwise
rotation
I = counter-
clockwise rotation
| 0 = 0,5 - 1,5
1 = 1 - 4 2 = 2 - 9 3 = 6 - 25 4 = 15 - 40 | 9=
9800
min-1 1=
1400
min-1 2=
2800
min-1 | 0=
heating oil
EL + L + kerosene
heating
oil
5 =
heating
oil
M + S + ES
6=
coaltar oil | H1 =electric heating integrated without thermostat
 t max=70K.
BH1 = drilling for H1
Sc = quick-closing valve | | B | VB | VBR | NVBR | M | 80 | M | 160 | | B | VB | VBR | NVBR | G | 120 | G | 240 | | B | VB | VBR | NVBR | F | 160 | F | 320 |
|
|
|
|
|
|
|
| | BG | VBG | VBGR | NVBGR | PP | 150 | PP | 300 | | BG | VBG | VBGR | NVBGR | PZ | 200 | PZ | 400 | | BG | VBG | VBGR | NVBGR | P | 300 | P | 600 | | BG | VBG | VBGR | NVBGR | MZ |
| MZ | 850 | | BG | VBG | VBGR | NVBGR | M | 450 | M | 900 | | BG | VBG | VBGR | NVBGR | GZ |
| GZ | 1100 | | BG | VBG | VBGR | NVBGR | G | 600 | G | – |
|
|
|
|
|
| – | – | | BH | VBH | VBHR | NVBHR | P | 1000 | – | – | | BH | VBH | VBHR | NVBHR | M | 1500 | – | – | | BH | VBH | VBHR | NVBHR | G | 2000 | – | – |
|
|
|
|
|
|
|
| | BHG | VBHG | VBHGR | – | P | 3000 | – | – | | BHG | VBHG | VBHGR | – | PZ | 3700 | – | – | | BHG | VBHG | VBHGR | – | M | 4500 | – | – | | BHG | VBHG | VBHGR |
| G | 6000 | – | – |
|
|
|
|
|
|
|
| | UHE-A2 |
|
|
| PZ | 200 | PZ | 400 | | UHE-A3 | – | – | – | P | 300 | P | 600 | | UHE-A4 | – | – | – | M | 450 | M | 900 | | UHE-A5 | – | – | – | GZ | 550 | GZ | 1100 | |
| | Example for ordering: hp- impeller pump, Series VB, with capacity of 450 l/h at 1400 min-1, fuel oil, direction of rotation "counterclockwise," pressure settings 2 （15-40 bar）. |
| Series E pression: VB GM - 1 - 4 - 10
max permitted suction pressure on suction of the connection of the pump is -0,6 bar.
Caution! Gas secretions arise already at -0,4 bar.
| Conversion Table
Suntec （TA-Series） ; — hp-Technik （UHE-Series）
| | Suntec |
| hp-Technik | | Suntec |
| hp-Technik | | TA 2 A |  | UHE-A2-PZ-D |
| TA 2 C | | UHE-A2-PZ-I | | TA 3 A | | UHE-A3-P-D |
| TA 3 C | | UHE-A3-P-I | | TA 4 A | | UHE-A4-M-D |
| TA 4 C | | UHE-A4-M-I | | TA 5 A | | UHE-A5-GZ-D |
| TA 5 C | | UHE-A5-GZ-I | | 
 Technical Selection Chart: Scaled Drawings Direction of rotation viewed from Shaft I = indirect – counterclockwise D = direct – clockwise The direction of rotation can only be changed in the factory. Therefore please assure that you state the desired direction of rotation as per the size chart/sheet when ordering! | | hp internal gear pumps up to 40 bar （Direction I = indirect - counterclockwise） | Pump
Series B
Size: | Viscosity: 6 mm2 sec-1 at 20° C | Gear Rotor
Size
Ø |
Shaft
Ø | Threaded Connection for （S/A） | Mano-
meter
Con-
nection | max. allowed
Pump
RPM
（min-1）
at I/D | Net
weight
（kg）
at I/D | n = 1400 min-1
Discharge l/h | n = 2800 min-1
Discharge l/h | | at 9 bar | at 30 bar | at 40 bar | Article No.
I | at
9 bar | at
30 bar | at
40 bar | Article No.
I | | BP | 45 | 30 | 20 | 011/0002 | 90 | 60 | 50 | 013/0002 | 25 | 12 | 3/8" | – | 2800 | 1,8 | | BM | 80 | 60 | 50 | 011/0003 | 160 | 130 | 120 | 013/0003 | 25 | 12 | 3/8" | – | 2800 | 1,8 | | BG | 120 | 100 | 80 | 011/0004 | 240 | 200 | 190 | 013/0004 | 25 | 12 | 3/8" | – | 2800 | 1,8 | | BF | 160 | 140 | 120 | 011/0005 | 320 | 270 | 260 | 013/0005 | 25 | 12 | 3/8" | – | 2800 | 1,8 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| | BG PP | 150 | 100 | 80 | 011/0052 | 300 | 240 | 210 | 013/0052 | 38 | 12 | ½" | – | 2800 | 2,6 | | BG PZ | 200 | 160 | 140 | 011/0053 | 400 | 310 | 280 | 013/0053 | 38 | 12 | ½" | – | 2800 | 2,6 | | BG P | 300 | 240 | 200 | 011/0019 | 600 | 520 | 480 | 013/0019 | 38 | 12 | ½" | – | 2800 | 2,6 | | BG MZ | – | – | – | – | 850 | 750 | 700 | 013/0068 | 38 | 12 | ½" | – | 2800 | 2,6 | | BG M | 450 | 390 | 360 | 011/0020 | 900 | 850 | 730 | 013/0020 | 38 | 12 | ½" | – | 2800 | 2,6 | | BG GZ | – | – | – | – | 1100 | 1000 | 870 | 013/0054 | 38 | 12 | ½" | – | 2800 | 2,6 | | BG G | 600 | 540 | 480 | 011/0021 | – | – | – | – | 38 | 12 | ½" | – | 1680 | 2,6 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| | BH P | 1000 | 700 | 600 | 011/0031 | – | – | – | – | 56 | 18 | ¾" | ¼" | 1680 | 6,4 | | BH M | 1500 | 1200 | 1000 | 011/0032 | – | – | – | – | 56 | 18 | ¾" | ¼" | 1680 | 6,4 | | BH G | 2000 | 1700 | 1400 | 011/0033 | – | – | – | – | 56 | 18 | ¾" | ¼" | 1680 | 6,4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| | BHG P | 3000 | 2200 | 2000 | 011/0043 | – | – | – | – | 75 | 22 | 1 ½" | – | 1400 | 14,9 | | BHG PZ | 3700 | 3000 | 2700 | 011/0080 | – | – | – | – | 75 | 22 | 1 ½" | – | 1400 | 14,9 | | BHG M | 4500 | 3600 | 3200 | 011/0044 | – | – | – | – | 75 | 22 | 1 ½" | – | 1400 | 14,9 | | BHG G | 6000 | 4800 | – | 011/0045 | – | – | – | – | 75 | 22 | 1 ½" | – | 1400 | 14,9 | |
| | | hp internal gear pumps up to 40 bar （Direction D = direct - clockwise） | Pump
Series
B
Size: | Viscosity: 6 mm2 sec-1 at 20° C |
Gear
Rotor
Size
Ø |
Shaft
Ø | Threaded
Connection
for （S/A） | Mano-meter
Con-nection | Heating
Capacity
H1 in Watt
at 220V, 50Hz
at I/D | Initial
Pump
Breakaway
Torque
at I/D | n = 1400 min-1
Discharge l/h | n = 2800 min-1
Discharge l/h | at
9 bar | at
30 bar | at
40 bar | Article
No. D | at
9 bar | at
30 bar | at
40 bar | Article
No. D | | BP | 45 | 30 | 20 | 012/0002 | 90 | 60 | 50 | 014/0002 | 25 | 12 | 3/8" | – | 100 | 1,2 | | BM | 80 | 60 | 50 | 012/0003 | 160 | 130 | 120 | 014/0003 | 25 | 12 | 3/8" | – | 100 | 1,2 | | BG | 120 | 100 | 80 | 012/0004 | 240 | 200 | 190 | 014/0004 | 25 | 12 | 3/8" | – | 100 | 1,2 | | BF | 160 | 140 | 120 | 012/0005 | 320 | 270 | 260 | 014/0005 | 25 | 12 | 3/8" | – | 100 | 1,2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| | BG PP | 150 | 100 | 80 | 012/0052 | 300 | 240 | 210 | 014/0052 | 38 | 12 | ½" | – | 100 | 1,6 | | BG PZ | 200 | 160 | 140 | 012/0053 | 400 | 310 | 280 | 014/0053 | 38 | 12 | ½" | – | 100 | 1,6 | | BG P | 300 | 240 | 200 | 012/0019 | 600 | 520 | 480 | 014/0019 | 38 | 12 | ½" | – | 100 | 1,6 | | BG MZ | – | – | – | – | 850 | 750 | 700 | 014/0068 | 38 | 12 | ½" | – | 100 | 1,6 | | BG M | 450 | 390 | 360 | 012/0020 | 900 | 800 | 730 | 014/0020 | 38 | 12 | ½" | – | 100 | 1,6 | | BG GZ | – | – | – | – | 1100 | 930 | 870 | 014/0054 | 38 | 12 | ½" | – | 100 | 1,6 | | BG G | 600 | 540 | 480 | 012/0021 | – | – | – | – | 38 | 12 | ½" | – | 100 | 1,6 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| | BH P | 1000 | 700 | 600 | 012/0031 | – | – | – | – | 56 | 18 | ¾" | ¼" | 160 | 3,2 | | BH M | 1500 | 1200 | 1000 | 012/0032 | – | – | – | – | 56 | 18 | ¾" | ¼" | 160 | 3,2 | | BH G | 2000 | 1700 | 1400 | 012/0033 | – | – | – | – | 56 | 18 | ¾" | ¼" | 160 | 3,2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| | BHG P | 3000 | 2200 | 2000 | 012/0043 | – | – | – | – | 75 | 22 | 1 ½" | – | 280 | 4,6 | | BHG PZ | 3700 | 3000 | 2700 | 012/0080 | – | – | – | – | 75 | 22 | 1 ½" | – | 280 | 4,6 | | BHG M | 4500 | 3600 | 3200 | 012/0044 | – | – | – | – | 75 | 22 | 1 ½" | – | 280 | 4,6 | | BHG G | 6000 | 4800 | – | 012/0045 | – | – | – | – | 75 | 22 | 1 ½" | – | 280 | 4,6 | |
 To insure proper pump functioning, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site! The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used. | |  |  |  | | Gear
Rotor Size | Discharge l/h | a1 | a2 | a3 | b1 | c1 | c2 | c3 | c4 | c5 | c6 | c7 | c8 | d1 | | 1400 min-1 | 2800 min-1 | | 25 | 45 - 160 | 90 - 320 | 35,5 | 20 | 33 | 51 | 41,5 | 14 | 16 | 40 | 20 | 55,5 | 76 | 131,5 | 12 | | 38 | 150 - 600 | 300 - 1100 | 43 | 26,5 | 38 | 70 | 55,5 | 14 | 16 | 40 | 20 | 69,5 | 76 | 145,5 | 12 | | 56 | 1000 - 2000 | – | 48,5 | 38 | 45 | 96 | 71,5 | 15 | 18 | 79 | 27 | 86,5 | 124 | 210,5 | 18 | | 75 | 3000 - 6000 | – | 64,5 | 83 | 70 | 115 | 129,5 | 18 | 25 | 65 | 37 | 147,5 | 127 | 274,5 | 22 | | | Gear
Rotor Size | Discharge l/h | sw | e | d2 | d3 | e1 | e2 | f2 | f3 | f4 | g1 | h1 | h2 | h3 | | 1400 min-1 | 2800 min-1 | | 25 | 45 - 160 | 90 - 320 | 27 | 31,2 | 54 | 80 | G 3/8" | 71 | 16,5 | 38 | 92 | 43 | 11 | 13 | 13 | | 38 | 150 - 600 | 300 - 1100 | 27 | 31,2 | 54 | 80 | G ½" | 82 | 19 | 44 | 92 | 43 | 11 | 13 | 13 | | 56 | 1000 - 2000 | – | 46 | 53,1 | 60 | 100 | G ¾" | 112 | 22,5 | 67 | 120 | 65 | 13 | 13 | 25 | | 75 | 3000 - 6000 | – | 55 | 63,5 | 80 | 120 | G 1 ½" | 170 | 35 | 100 | 150 | 90 | 14,5 | 15 | – | |
| | | 直銷德國歐洲機電工控設備配件 安諾科技（北京恒遠安諾科技有限公司），致力于為客戶提供德國及歐洲生產的各類工控機電設備、儀器儀表、零配件，保證100%原裝*。公司(si)總部設在歐洲航空中心法蘭克(ke)福，距(ju)法蘭克(ke)福機(ji)場僅35km, 通過(guo)拼單(dan)發貨的(de)物流方(fang)式(shi)，小(xiao)訂單(dan)也不用(yong)承擔高運(yun)費，zui大程度地為客戶(hu)節省采購成本，因此本公司(si)所有產品均不設zui小(xiao)訂單(dan)金額或zui小(xiao)訂購數(shu)量。 通過從德國(guo)工(gong)廠(chang)直(zhi)接采購，您(nin)可以避免(mian)國(guo)內(nei)代理、辦事處和經銷商的(de)(de)(de)(de)分(fen)級(ji)代理，層層盤剝的(de)(de)(de)(de)模式，享受到(dao)(dao)價格低貨期短的(de)(de)(de)(de)采購服務。對于(yu)一些德國(guo)產(chan)(chan)品(pin)，我們(men)通過(guo)集中批(pi)量采購以獲取廠(chang)商*折(zhe)扣，可以提供(gong)比國(guo)內(nei)市場價格更低的(de)(de)(de)(de)報價。對于(yu)不太容(rong)易找到(dao)(dao)的(de)(de)(de)(de)德國(guo)及(ji)歐洲(zhou)小(xiao)(xiao)品(pin)牌的(de)(de)(de)(de)工(gong)業產(chan)(chan)品(pin)，我們(men)可以幫助您(nin)尋找并(bing)代為采購，為本公司直(zhi)接供(gong)貨的(de)(de)(de)(de)歐洲(zhou)中小(xiao)(xiao)企業已達1000多家。 以規范的管理，流程化的采購模式，健全的物流管理，完善的售后服務，我們竭誠為您服務！歐洲所有進口產品都能采購。只要您提供品牌和型號，其余的事情交給我們！為了提高報價效率，請您務必提供品牌、型號、貨號、數量或者銘牌照片。 只要您提供品牌和型號，其余的事情交給我們！ 錢
： -8010 -8010
或發送電子郵件至：1095688308 |
您的位置：
Technical Selection Chart: Scaled Drawings
t max=70K.
Technical Selection Chart: Scaled Drawings
To insure proper pump functioning, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site! The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.
在線咨詢
返回頂部